Internal Combustion Hydraulic High-Lift Track Lifting Machine

group name: Others

Min Order: 1 piece

brand name: Railway Maintenance Equipment & Solutions

model: YQJ-250(G)

Nearest port for product export: no

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW

Acceptable payment methods: T/T, L/C, D/P D/A

update time: Wed, 18 Mar 2026 02:57:03 GMT

contact supplier

Packging & Delivery

Min Order1 piece

Briefing

A specialized Track Lifting Machine for track lifting and lining operations on railway lines.

Detailed

Overview

The YQJ-250 On-track Hydraulic Rail Lifter is suitable for track lifting operations on various rail types. This machine is equipped with a safe and reliable insulation device that meets track circuit requirements, and comes with travel and off-tracking devices. It features safe and reliable operation, flexible control, and easy maintenance.

Technical Parameters of the YQJ-250 On-track Hydraulic Rail Lifter:

⚪ Power Source: HONDA GX390 Gasoline Engine

⚪ Power: 9.5 kW

⚪ Fuel Consumption Rate: 310 g/kW.h

⚪ Lubricating Oil Capacity: 1.12 L

⚪ Maximum Lifting Force: 125 × 2 kN

⚪ Maximum Single-Stroke Lifting Height: 500 mm

⚪ Working Pressure: 15-16 MPa

⚪ Working Flow Rate: 23 L/min

⚪ Manual Pump Flow Rate: 75 mL per reciprocating cycle

⚪ Overall Dimensions (L × W × H): 1650 mm × 850 mm × 1100 mm

⚪ Unit Weight (including hydraulic oil): 370 kg

Operating Instructions for the Hydraulic Rail Lifter/Line Adjuster

⚪ For Lifting: Place the machine beneath the rail base, ensuring the rail base contacts the lifting wheel and the rail base side contacts the limit stop. (For Line Adjustment: Place the machine beneath the rail base, ensuring the rail side contacts the lining stop.) Then, lower the carrying beam and close the oil return valve.

⚪ Operate the pumping lever to actuate the oil pressure rocker arm. Stop the lifting/lining operation when the piston rod extends to the visible safety warning line.

⚪ Once the desired lifting/lining height is achieved, stop pumping. Press the oil return handle to retract the piston into the cylinder, resetting the working cylinder. The lifting/lining task is now complete.